MCS 1500
• Core features
• No dynamic seals
• Minimal purge for low-waste operation
• Easy in-line installation
• Continuous 24/7 operation
• Maintenance-friendly design means lower labour costs
• Eco-friendly. No bags to purchase, change or landfill
• 316 stainless steel vessel
• Minimal purge for low-waste operation
• Easy in-line installation
• Continuous 24/7 operation
• Maintenance-friendly design means lower labour costs
• Eco-friendly. No bags to purchase, change or landfill
• 316 stainless steel vessel
Specification:
• Approx Weight: 775 lbs (352 kg)
• Service Height: 102 in (2591 mm)
• Flow Rates at 100µ: Up to 1500 gpm / 340 m³/hr
• Operating Pressure: 180°F (82°C)
• Operating Temperature, max.: 30–150 psi (2–10.5 bar)
• Viscosity: Water/water-like fluids
• Standard Retention: 150–1,100 microns
• Vessel Material: 316 Stainless Steel
• Elastomers: EPT/EPDM (Nordel) or Viton
• Process Connections: 8 in 150# Flanged / DN 200 Flanged
• Purge Connection: 2 in NPT / 2 in BSPT
• Air for Actuator Drive (Clean, dry, non lubricated air): 80 psi (5.5 bar) min – 116 psi (8 bar) max, 5.0 cfm (141.5 L/min)
• Electrical for Controllers: 115 VAC or 230 VAC 50/60 Hz
• Semi-Auto Voltage: 24 VAC, 115 VAC, 230 VAC, 24 VDC 115/230 VAC
• Service Height: 102 in (2591 mm)
• Flow Rates at 100µ: Up to 1500 gpm / 340 m³/hr
• Operating Pressure: 180°F (82°C)
• Operating Temperature, max.: 30–150 psi (2–10.5 bar)
• Viscosity: Water/water-like fluids
• Standard Retention: 150–1,100 microns
• Vessel Material: 316 Stainless Steel
• Elastomers: EPT/EPDM (Nordel) or Viton
• Process Connections: 8 in 150# Flanged / DN 200 Flanged
• Purge Connection: 2 in NPT / 2 in BSPT
• Air for Actuator Drive (Clean, dry, non lubricated air): 80 psi (5.5 bar) min – 116 psi (8 bar) max, 5.0 cfm (141.5 L/min)
• Electrical for Controllers: 115 VAC or 230 VAC 50/60 Hz
• Semi-Auto Voltage: 24 VAC, 115 VAC, 230 VAC, 24 VDC 115/230 VAC
